Build Coyote ventilation performance into a custom outdoor hood enclosure. The Coyote C1LINER is a stainless-steel power pack offered in three sizes for covered outdoor cooking areas. It includes baffle filters, a grease rail, variable-speed controls, Heat Sentry response, integrated task lighting, and a 10-inch duct adapter.
Blower required: C1BLOW1200 is mandatory, non-substitutable, and sold separately. The surrounding custom enclosure, ductwork, roof/wall cap, and electrical connection are project-supplied.
Model Selection
- C1LINER36: 11-1/16 H 34-7/16 W approximately 28-3/8 D inches; for grills up to 30 inches wide
- C1LINER42: 11-1/16 H 40-7/16 W approximately 28-3/8 D inches; for grills up to 36 inches wide
- C1LINER48: 11-1/16 H 46-7/16 W approximately 28-3/8 D inches; for grills up to 42 inches wide
Key Features
- Outdoor ventilation power pack for integration into a custom hood enclosure
- Removable dishwasher-safe baffle filters and grease rail
- Variable-speed blower control and Heat Sentry response
- Integrated task lighting
- 10-inch round duct connection
Installation Requirements
- Design the custom opening from the exact model drawing and physical unit; do not use nominal width as the finished cutout.
- Install under a protective roof, maintain at least 36 inches above the cooking surface, and exhaust outdoors.
- Use short, straight 10-inch round metal ductwork and maintain service access to the power pack and blower.
- The 120VAC system requires a qualified, grounded hardwired connection and GFCI protection under applicable codes.
- Not intended for use over charcoal grills.
Lighting note: Coyote resources conflict on LED versus halogen lamps. Verify the physical unit and rating label before specifying replacement lamps.
Manufacturer Resources
- C1LINER Specification Sheet
- C1LINER Installation & Use Manual
- Coyote Ventilation Collection
Unconditional Satisfaction Guarantee
